Updated Jeep Liberty control arms for lifted and stock suspensions

We have updated our Jeep Liberty (KJ 2002-2007 & KK 2008-2012) rear lower adjustable control arm joints. Our control arms are the strongest bolt-in control arms available for the Jeep Liberty and now just got a bit stronger with even more adjustment. We also use a low profile grease fitting to reduce the chances of it being damaged while offroad. If you prefer a zerk style fitting you can interchange the fittings.

The body of the Enduro Joint is Forged 4140 heat treated Chromoly steel. We did not try to cut any corners by making a short threaded shank like a heim joint instead we give you 4.75 of 1.25-12 threaded shank. That is over two inches longer than 1.25 heims on the market.

The Enduro Joint s ball is made from 52100 bearing steel and incorporates the high misalignment spacers all into one piece of steel. The spherical bearing is then Hard Chrome plated to provide an ultra smooth surface and has proven to provide excellent corrosion protection. The mounting width of the Enduro Joint is 2 5/8 and accepts a 9/16 bolt. The cups that the spherical bearing rides on are an 88 durometer polyurethane that ensures maximum life, no squeaks like heim joints and they help to dampen axle vibrations felt through the chassis. The body of the joint is gold zinc plated to ensure that the Enduro Joint looks great for the life of the joint. Joints will need to be greased before installation.

Purchase your set today by clicking here.


If you would like us to make you a set with the previous style Enduro joint just shoot us an email.

shank length: enduro joint vs heim joint
Follow us on IG @DobermanRacing!