These Jeep Liberty control arms are made from 2″ OD DOM steel tubing with a 0.25″ Wall thickness and Barnes4wd Enduro Joints with a 1.25″ thick shank and 9/16″ bolt hole. These control arms will increase your rear suspension flex dramatically.
When Barnes 4WD designed the rebuild-able Enduro suspension joint they combined the best materials, the best manufacturing processes and the best steel and polyurethane treatments available all in one joint. The body of the Enduro Joint is Forged 4140 heat treated Chromoly steel. They did not try to cut any corners by making a short threaded shank like a heim joint instead they give you 3.25″ of 1.25-12 threaded shank. That is over one inch longer than 1.25″ heims on the market. The Enduro Joint s ball is made from 52100 bearing steel and incorporates the high misalignment spacers all into one piece of steel that provide 40 degrees of misalignment. Forty degrees of misalignment will net almost 16.5″ of travel on a two foot control arm. The spherical bearing is then Hard Chrome plated to provide an ultra smooth surface and has proven to provide excellent corrosion protection. The mounting width of the Enduro Joint is 2 5/8 and accepts a 9/16″ bolt. The cups that the spherical bearing rides on are an 88 durometer polyurethane that ensures maximum life, no squeaks like heim joints and they help to dampen axle vibrations felt through the chassis. The body of the joint and the spanner nut are gold zinc plated to ensure that the Enduro Joint looks great for the life of the joint. Once the joint is fully assembled we are still not finished making the ultimate joint. Every completed Enduro Joint assembly is then Cryogenically Treated to give the Enduro Joint the most strength and greatest wear characteristics possible.
Did you lift your liberty and are now having difficulty getting a proper pinion angle? These rear lower links are fully adjustable allowing you to dial in the perfect pinion angle for your rear drive shaft. This will reduce vibrations and increase the life of your u-joints.
Have your OEM control arms rusted apart or have you worn out the cheap rubber bushings they come with? These are fully rebuildable so if you manage to wear out the joints you can purchase a rebuild kit from us.
Image is of a prototype. Yours will come painted black. Other colors available for an additional charge. If you would like to paint them yourselves just let us know and we will ship them bare.
Please Note: These are all hand built and may take 5-7 business days to fabricate before shipping. If you need them sooner please contact us and we will see if we can get them to you a bit quicker.
Only logged in customers who have purchased this product may leave a review.